Thermo Scientific Barnstead Smart2Pure 12 UF, Operating Instructions Manual

Page: 42 / 110

7
Installation
Connections of the Smart2Pure 12 system
32
Smart2Pure Thermo Scientific
4 a. Locate the RO/pretreatment cartridge.
b. Place the RO/pretreatment cartridge in the
front part of the system and insert the three
quick connectors into the RO/pretreatment
cartridge. When you hear an audible click you
can be sure that the quick connectors have been
inserted correctly.
The quick connectors are attached to the system in such
a manner so it is to prevent installing the
RO/pretreatment cartridge incorrectly.
5 a. Use the R3/4“ feedwater connecting kit,
supplied with the system, to connect the
Smart2Pure system with the feedwater tap.
Therefore push the R3/4“ union nut over the
outer diameter 1/4“ tube und push in the tube
into the fitting and then connect the open end
of the outer diameter 1/4“ tube to the feedwater
connection of the Smart2Pure panel.
b. After this screw in the R3/4“ union nut with the
dirt screen onto the feedwater tap.
Step Action Figure
b)
RO/pretreatment
cartridge
Quick connectors
a)
3/4“ Union nut
Outer diameter
1/4“ tube
Dirt screen
Fitting
Feedwater connection
Smart2pure 3/6
Feedwater connection
Smart2pure 12