18
Locating Unit
Bench Mounting
1. Place the EASYpure R
O
D
I
on a bench top that
is accessible to water, electricity and an atmo-
spherically vented drain, and that is convenient
to your work area, noting the Clearance Re-
quirements.
Wall Mounting (Optional) D13324
Install the optional wall bracket on the wall in a location
that is accessible to water, electricity and an atmospheri-
cally vented drain, and that is convenient to use. A mini-
mum of 4 customer supplied fasteners must be used. To
mount the EASYpure R
O
D
I
to a wall bracket:
1. Remove the four feet from the EASYpure R
O
D
I
and retain the screws.
2. Place the EASYpure R
O
D
I
on the wall bracket
swivel base so the screw holes where the feet
were attached line up with the holes in the wall
bracket. There are guides on the wall bracket
that will mate with the EASYpure R
O
D
I
. See
Figure 9.
3. Reinstall the four screws removed in step 1
through the bottom of the wall bracket and into
the EASYpure R
O
D
I
.
Water Service Connections
Feed Water Connection
1. Locate the length of .95 cm (3/8”) O.D. tubing
provided with a quick disconnect insert on one
end and a .95 cm (3/8”) O.D. X .64 cm (1/4”)
NPT tubing adapter on the other.
2. Install the tubing adapter onto your incoming
water line. Refer to tubing installation. We rec-
ommend a customer supplied shut off valve be
installed in your feed water line. The quick dis-
connect insert will be inserted into the feed
water inlet on the lower left corner in the rear of
the EASYpure R
O
D
I
during the Initial Operation.
I
NSTALLATION
Warning
This device is to be used with water
feeds only. Cleaning agents must be
used in compliance with instructions
in this manual. Failure to comply
with the above could result in explo-
sion and personal injury.
Warning
Do not place the EASYpure R
O
D
I
directly over equipment that requires
electrical service. Routine mainte-
nance of this unit may involve water
spillage and subsequent electrical
shock hazard if improperly located.
Warning
Do not use in the presence of flam-
mable or combustible materials; fire
or explosion may result. This de-
vice contains components which
may ignite such materials.
Figure 9: Orientation of Optional Swivel Base
Note
Ensure there are no kinks in the tub-
ing that could restrict water flow.
