Thermo Scientific AquaSensors
™
AnalogPlus
™
Differential pH Sensor User Guide
5
1.2.
Intended use
The Thermo Scientific AquaSensors AnalogPlus pH sensor is designed to continuously measure pH and
temperature in aqueous solutions in accordance with the technical product specifications in Section 2.2 of this
manual.
Any other use, or use not mentioned here, that is incompatible with the technical specifications is deemed
inappropriate. The operator is solely responsible for any damage arising from such use.
Other prerequisites for appropriate use include:
•
Observing the instructions, notes and requirements set out in this instruction manual.
•
Observing all local safety regulations.
•
Observing all warnings and cautions in the documentation regarding all products used in this
measurement system, including the pH sensor, mounting hardware, analyzer electronics and
cabling.
•
Observing the prescribed environmental and operational conditions.
•
Observing chemical compatibility with all wetted materials.
1.3. Safety Instructions
AnalogPlus pH sensors should be installed and operated only by personnel familiar
with the sensor and qualified for such work.
A defective sensor should be returned for repair or replacement. Contact Thermo
Fisher Scientific to obtain a Return Material Authorization (RMA) number.
No modifications to AnalogPlus pH sensors are allowed. The manufacturer/supplier
accepts no responsibility for damage caused by unauthorized modifications. The risk
is borne entirely by the user.
1.4. Removal from Service / Correct Disposal of the Sensor
Removal from Service
•
Disconnect the cable wiring from the controller terminal block.
•
Remove the sensor from the mounting hardware.
Correct Disposal of Unit
•
When the sensor is taken out of service, observe the local environmental regulations for correct
disposal.