Thermo Scientific AquaSensors
™
AnalogPlus
™
Differential pH Sensor User Guide
21
3.4.4.
Tri-clamp Mounting
AnalogPlus sensors fitted with a 316 Stainless Steel 2.5 inch Tri-clamp flange can be mounted in a
standard 2.5 inch Tri-clamp tee. In this setup the Branches of the tee are equal in length to the run. In
the case of the 2.5 inch tri-clamp mounting hardware, the length is 7 inches and the insertion branch is
3.5 inches. Thermo Fisher Scientific can provide the gasket, the clamp and the tee when the mounting
hardware package is ordered.
2.5 Inch Tri-clamp flange
Groove for Tee Gasket
Five or Six Wire
Cable
CPVC Sensor Body with a 3.375 inch depth
from the flange to the sensor tip
Removable Salt Bridge
Glass pH Electrode
Figure 3.13:
1.5 Inch Sensor body with 2.5 Inch Tri-clamp flange.
(–S25 Part Number Suffix)
3.375 Inches
