Thermo Scientific Applied Biosystems QuantStudio User Manual Download Page 51

Page: 51 / 126

Using the QuantStudio

™

3D AnalysisSuite

™

Software

After the analyzed imaging data has been transferred to the QuantStudio

™

AnalysisSuite

™

Software, you can log into the software to perform the secondary

analysis as described below.

When deployed in the Connect cloud-based platform configuration, the
AnalysisSuite

™

Software is accessed as a web-based application that can be run

using any compatible web browser (see “System requirements” on page 13).

To access the software from a Connect platform account:

Confirm that your computer has a network connection.

Note:

If your computer does not have a network connection, contact customer

support for information on available AnalysisSuite

™

Software deployment

options (see “Customer and technical support” on page 123).

Open a browser window and go to

thermofisher.com/analysissuite

Note:

Ensure that your browser is set to accept cookies and JavaScript is

turned on. If you cannot access the website, contact customer support.

Sign into the software using your Connect platform user name and password, or
follow the instructions to create a new user account.

Note:

If you cannot sign in to the software, contact customer support.

System requirements

The QuantStudio

™

3D AnalysisSuite

™

Software is a web-based application that is

recommended for use with the following Internet browsers.

• Google

™

Chrome

™

v37 or later

• Microsoft

™

Internet Explorer

™

v10 or later

• Mozilla

™

Firefox

™

v32 or later

• Apple

™

Safari

™

v6 or later

Note:

The software performance may vary based on your system configuration, and

requires an internet connection capable of 300kbps/300kbps (upload/download) or
better. If your network employs a firewall that restricts outbound traffic, it must be
configured to allow outbound access to

apps.lifetechnologies.com

on HTTPS-443.

Access the

software from

a Connect

cloud-based

platform

account

Access the

software from

the server

Chapter 5

Image and analyze the chips

Using the QuantStudio

™

3D AnalysisSuite

™

Software

QuantStudio

™

3D Digital PCR System User Guide

Summary of Contents for Applied Biosystems QuantStudio































































































































Search results

Summary of Contents for Applied Biosystems QuantStudio

Reviews:

Related manuals for Applied Biosystems QuantStudio

Brands by name

Popular brands

Thermo Scientific Applied Biosystems QuantStudio, User Manual

Search results

Summary of Contents for Applied Biosystems QuantStudio

Reviews:

Related manuals for Applied Biosystems QuantStudio

Brands by name

Popular brands