Use a 1.5-kVA power line regulator in areas where the supplied power fluctuates in
excess of ± 10% of the normal voltage. Power fluctuations can adversely affect the
function of the systems.
Note:
A power line regulator monitors the input current and adjusts the power
supplied to the systems. It does not protect against a power surge or failure.
Use a 10-kVA surge protector (line conditioner) in areas with frequent electrical
storms or near devices that are electrically noisy, such as refrigerators, air
conditioners, or centrifuges. Short-duration, high-voltage power fluctuations can
abruptly terminate the function of, and thereby damage the components of, the
systems.
Note:
A dedicated line and ground between the systems and the building’s main
electrical service can also prevent problems caused by power fluctuations.
About the instrument
The QuantStudio
™
3D Digital PCR Instrument consists of the components shown in
the following figure.
1
2
3
4
5
6
7
8
1
Touchscreen
—Provides access to the instrument functions, such as data transfer and
instrument operation.
2
Chip tray
—Conveys the QuantStudio
™
3D Digital PCR 20K Chip v2 to and from the imaging
stage in the interior of the instrument.
3
USB port
—Provides USB communication with the instrument. Can be used to transfer data to
and from the instrument.
4
Fuse cover
—Dual 1.6A, Time Lag T, 250 VAC, 5 × 20-mm electrical fuses that protect the
instrument from excessive electrical current.
5
Power switch
—Power switch for the instrument, where the states are on ( | ) or off ( O ).
6
Power port
—A 100–240 VAC port that provides power to the instrument.
7
Ethernet port
—An RJ45 port that provides Ethernet (gigabit) communication with the
instrument.
Power line
regulator
Surge
protector
Chapter 1
Product information
About the instrument
1
12
QuantStudio
™
3D Digital PCR System User Guide
