manualshive.com logo in svg

Thermo Scientific Antaris II, Manual

Share
Download
Thermo Scientific Antaris II Manual Download Page 6

Introduction 

About this manual 

This manual discusses the important safety features and explains the spatial 
and environmental requirements and the services necessary to install and 
operate these instruments. 

 

Note

 

This document is included on the language pack CD that comes with 
R

ESULT 

software suite version 3.0 or higher. It is a portable document 

format (PDF) file. To open this file, Adobe® Reader® software, version 7.0 
or higher, is required. This software can be installed from your R

ESULT

 

software CD or downloaded from the Adobe Systems, Inc. web site, 
www.adobe.com. (See the Adobe Reader on-line help for information 
about using a PDF.) 

 

 

Conventions 

used in this manual 

This manual includes safety precautions and other important information 
presented in the following format: 

 

Note

 

Notes contain helpful supplementary information.   

 

Notice

 

Follow instructions labeled “Notice” to avoid damaging the system 
hardware or losing data.   

 

 

Caution

 

Indicates a potentially hazardous situation which, if not avoided, may result 
in minor or moderate injury. It may also be used to alert against unsafe 
practices.   

 

 

Warning

 

Indicates a potentially hazardous situation which, if not avoided, could 
result in death or serious injury.   

 

 

Danger

 

Indicates an imminently hazardous situation which, if not avoided, will 
result in death or serious injury.  

 

2 

Antaris II and Antaris MX Site and Safety Information 

Thermo Fisher Scientific 

Summary of Contents for Antaris II





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands