1-4
CO
2
Resistant Shaker
Thermo Scientific
Section 1
Unpacking and Installation
1. Place the instrument on a level and firm surface; it must be capable
of supporting the weight and load of the instrument, and the impact
force generated by the motion. Prepare related parts (see Figure 1-2).
2. Install the horizontal universal platform on the fixed plate of the Main
body, ensure all four mounting holes in the universal platform and the
four threaded mounting holes are in alignment.
3. Fasten the universal platform and the fixed plate with four M4x14
cross recessed countersink head screws.
18 inch (Aluminum)
Platform Installation
Figure 1-2.
18 inch Platform Installation Diagram
1) M4x14 cross recessed countersink head screws
2) 18 inch (aluminum) platform
3) Main body of CO
2
resistant shaker
Summary of Contents for 88881101
Page 5: ...iv CO2 Resistant Shaker Thermo Scientific Table of Contents ...
Page 21: ...3 4 CO2 Resistant Shaker Thermo Scientific Section 3 Operation ...
Page 33: ...7 2 CO2 Resistant Shaker Thermo Scientific Section 7 Troubleshooting ...
Page 35: ...8 2 CO2 Resistant Shaker Thermo Scientific Section 8 Warranty Information ...
