Thermo Scientific 88881101, User Manual

Page: 19 / 36

3-2 CO
2
Resistant Shaker Thermo Scientific
Section 3
Operation
Operations on the
Control Panel
(Continued)
1) Display LED: Shows time or speed
2) RPM indicator light: LED shows current speed
3) TIME indicator light: LED shows current time.
4) WARN indicator light: Over-speed alarm.
5) RUN indicator light: The instrument is running.
6) RPM/TIME Key: While instrument is in operation, press to change
time and speed display; when setting parameter, press to change
minutes, hour or speed.
7) Up Arrow Key: Increases value. Hold for 3 seconds to increase rapidly.
8) Down Arrow Key: Decreases value. Hold for 3 seconds to decrease
rapidly.
9) Key: The power is On/Off.
10) Run/Stop Key: The instrument is running or stopped.
Speed setting
1. Press RPM/TIME key. The speed indicator light is lit.
2. Press up and down arrow keys to access the speed setting state, speed
value starts flashing.
3. Press up and down arrow keys to change the speed value. Speed
increases or decreases. The minimum unit is 1rpm.
4. During settings, the unit will reset to current values if no value is input
after three seconds.
5. Press “Run/Stop” key to run or stop.
Time setting
1. Press RPM/TIME key. The time indicator light is lit.
2. Press up and down arrow keys to access the speed setting state. Speed
value starts flashing.
3. Press up and down arrow keys to change the time value. Time
increases or decreases. The minimum unit is 1 minute or 1 hour.
4. During settings, the unit will reset to current values if no value is input
after three seconds.
5. Press “Run/Stop” key to run or stop.
Speed and Time
Settings