Drybath Incubator 2-1
Thermo Scientific
The holes of the blocks should be regularly cleaned with the damp cloth to
ensure the test tube be well contacted with the wall of the holes so as to
have good heat conduction. If the surface of the instrument is polluted, it
can be cleaned with a slightly damp soft cloth.
Warning
When cleaning the instrument, the power supply should be shut
off and unplugged. The instrument surface should be cleaned with a non-
corrosive cleaning agent.
g)
g)
There is a sign of “CAUTION: HOT SURFACE!
ATTENTION: SURFACE HOT” on the instrument. The metal part
(module) near the sign should not be touched with any part of the body
when the instrument is operating in a high temperature state or just
finished operation to avoid burns!
Explanation of symbols
Attention,
read use
r
manual before use.
Alternating Current
Protective Conductor Terminal
In any of the following cases, immediately turn off the power
supply, withdraw the power plug from the power socket, contact the
supplier for service:
• Liquid drops into the inside of the instrument.
• The instrument is rained on or water is spilled on it.
• The instrument works abnormally, especially if generating an abnormal
sound or odor.
• The instrument is dropped or its casing is damaged.
• The function of instrument obviously changes.
