Files saving interface
Press “BACK” to go back to the program setting interface.
Press “SAVE” to save the file.
Press “RUN” to enter into the program running interface. If the
changed program has not been saved, the warning box will pop up.
Choose “File name” and
“Password” to set the file
name and the password. By
pressing Figures from 2-9
quickly, the input method
will be changed to English to
set the file name.
Program running interface
Press “CAL.” to call for the
temperature adjustment
interface. ((If the external
sensor is being used, then
there would be no “CAL”,
and the temperature is unable
to be adjusted). Refer to
‘Single Running Interface’.
Press “SKIP” to skip to the next section. If it is the last section, the
interface of asking you whether to stop the program will appear. Refer
to ‘Single Running Interface’.
Press “PAUSE”, the program will be paused and the temperature will
be maintained to the set temperature and the pause interface will pop
up.
Press “STOP”, the cancel interface will pop up. Refer to ‘Single
Running Interface’.
Instruction: During the operation of the instrument, the temperature and
the time should not be changed. If needed, stop the program and enter
into the setting interface to change them.
6-4
Drybath Incubator
Thermo Scientific
Section 6
Operation Guidance
Operation Instructions
(continued)
