manualshive.com logo in svg

Thermo Electron Evolution 300, User Manual

Share
Download
Thermo Electron Evolution 300 User Manual Download Page 57

Chapter 4 – Using the Instrument 

The wavelength and factor values contained in the method are 
recognized values established in the literature. Values may be edited, if 
required. 

4.

 

Highlight Reference Wavelength Correction and press Enter to 
toggle Off/On. 

When On, a Reference Wavelength is added to the parameter list. 

5.

 

Highlight Display Protein and press Enter to toggle Yes/No. 

When Yes, the protein factors are displayed. 

6.

 

Edit the Dilution Multiplier, if required. 

7.

 

Edit the Units, if required. 

8.

 

When using a DNA method with scan, press the Setup Scan 
function key. 

 

This will access the Setup Scan page from which the start and stop 
wavelengths can be edited. 

If the method has been edited, it may be saved to the instrument 
Library or to disk. A different file name must be used. 

Thermo Electron Corporation 

Evolution 300 and Evolution 600 User’s Guide 

53 

Summary of Contents for Evolution 300


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands