manualshive.com logo in svg

Thermo Electron Evolution 300, User Manual

Share
Download
Thermo Electron Evolution 300 User Manual Download Page 22

Chapter 3  Accessories 

Smart Accessories 

Smart Accessories are cell changers and sample holders that feature 
auto-recognition, smart alignment and serial number reporting, thereby 
saving you time and improving productivity. Smart Accessories are easily 
interchanged and ensure proper configuration of software methods. 

Choose from a comprehensive selection for your analysis needs: 

Smart Thermostatted Linear 8-Cell Changer 

— This is a fast, precise 

accessory for rapid measurement of up to 8 samples in manual, 
semiautomatic or fully automatic modes. It supports standard cuvettes, 
microcells, dissolution flowcells and solid samples of pathlengths from 
10mm to 100mm. There is also a socket for connecting a temperature 
probe accessory, when purchased. 

Smart Linear 16-Cell Changer 

— This is a fast, precise accessory for rapid 

measurement of up to 16 samples in manual, semiautomatic or fully 
automatic modes. It supports 4-channel cells and 4-channel flowcells. 

Smart Thermostatted Rotary 7-Cell Changer 

— Consists of a carousel 

(also referred to as a cell holder) installed on a base unit. The base unit 
incorporates the drive motor, control circuitry and memory. There is also a 
socket for connecting a temperature probe accessory, when purchased. 

Smart Peltier Thermostatted Single Cell Holder

— For precise 

temperature control (e.g., DNA denaturation), this accessory provides 
temperature control from 5° to 110°C with ramping at 0.1° to 6°C per 
minute for a single 8.5mm cell and low head-space micro cells There is also 
a socket for connecting a temperature probe accessory, when purchased. 

Smart Sipper 

— A multi-roller peristaltic pump that is mounted in the 

sample position of the sample compartment with Sip and Sip-and-run 
operating modes supported. Samples may be pumped to waste or returned. 
The sipper allows for calibration of tubing volume with minimum sample 
volume of 200μl with a single, standard cell holder. A flowcell is required. 

Smart Calibration Validation Carousel (CVC) 

— Provides automatic 

testing of UV and visible wavelength accuracy, UV and visible absorbance 
accuracy, UV and visible stray light, resolution, noise and stability. 
Absorbance and wavelength filters are traceable to NPL or NIST via an 
ISO standard 17025 accredited calibration process. The CVC is supplied 
with a calibration certificate and shipping box for recalibration. 

18 

Evolution 300 and Evolution 600 User’s Guide 

Thermo Electron Corporation 

Summary of Contents for Evolution 300


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands