THERMEx ALSACE UDTRAEK, Instruction Manual

Page: 36 / 40

36 THERMEX ALSAcE PULL OUT B 520192161201032021
Eng
LISH
»
U
SE
OF
THE
HOOD
USE OF THE HOOD
The hood is fitted with:
•
LEDs
• Glastouch
• After-running
cONTROL PANEL
1. Light
2. Extraction
3. Periodic extraction
4. After-running
5. Slider panel
6. On/off
NOTE: The front of the hood must be pulled out in order for the functions of the hood to be activated.
SLIDER PANEL
The slider panel enables the user to adjust light brghtness, extraction power, time for periodic extraction and after-run. The slider has four levels,
which are indicated by the blue LED lights. Each level has two pairs of LED lights.
ExTRAcTION
The motor is activated by briefly touching the ’extraction’ button. The icon will change from lighting blue to flashing red. The motor always starts
at speed 1, which is indicated by the fact that one LED is lit on the slider panel.
The speed of the motor is increased by activating the slider panel and sliding it up to the desired speed. There are four levels in total.
The motor is switched off by briefly touching the ’extraction’ button. This is regardless of which speed the motor is running at. The motor also
turns off if the range hood is turned off completely.
NOTE: All functions will be turned off if the hood is pushed together.
LIGHT
The light on the hood is switched on by briefly pressing on the ’light’ button. This can be done regardless of other functions. The light always
switches on at full power, but can be dimmed using the slider panel. There are four levels of brightness.
The light is switched off by briefly touching the ’light’ button. This can be done regardless of the step the light has been set to. The light also
turns off if the range hood is turned off completely.
NOTE: All functions will be turned off if the hood is pushed together.
PERIODIc ExTRAcTION
Periodic extraction means that the hood starts once every hour at speed 1 for 5, 10, 15 or 20 minutes in order to ventilate the kitchen.
Periodic extraction is switched on by touching the ’periodic extraction’ button. This can be done regardless of other functions. The time which the
periodic extraction should run for is adjusted using the slider panel.
1 2 3 4 5 6
Level 1
Level 2
Level 3
Level 4