14 |
P a g e
Part Number - 00824 Revision K, DCO 2017-0074
© 2017 Thermedx
®
, LLC
Insert alignment tool into top hole of support pole.
Install main unit onto support pole, ensuring front of main unit is in line with locking caster of
wheeled base. The main unit is seated on the support pole when the pins protruding from the
base align with the holes in the bottom of the main unit. Attach with (4) threaded fasteners
and lock washers. The preferred lifting method is one hand on the top handle, and one under
the recess on the back of the unit.
Plug in canister ring and secondary display (optional) to ports in lower rear of main unit. Install
power cord.
