THERMASOL.COM
I
800.776.0711
12
DOWNLOAD THE APP AND CONNECT TO THE THERMASOL SWM-2
1. Go to the Google Play App Store on your Android phone or table. Search for and download the latest ThermaSol App
2. Select “Settings” on your Android device
3. In the Settings, select the Wi-Fi menu and make sure it is on/active
4. Under “Wi-Fi networks” select “ThermaSol”
5. After connecting you will see “Connected” beneath ThermaSol as shown below in Figure 13
SECURE THE NETWORK
1. Open a browser
3
and enter “192.168.0.1” in the address bar
2. When prompted, enter default values “admin” for username and “PASSWORD” for password to log in to the SWM-2
configuration web page
3. Select the “Advanced” tab on the left side column of the configuration web page
4. Enter your own password for the access point and then press submit. The change will be confirmed as shown below in
Figure 14
RECONNECT TO THE THERAMSOL SWM-2
1. Select “Settings” on your Android device
2. In the Settings, select the Wi-Fi menu and make sure it is on/active
3. Under “Wi-Fi networks” select “ThermaSol”
4. Enter the password that was created in the previous section and connect
Continued on page 13.
3
Supported browsers are Internet Explorer 6.0 and up, Mozilla Firefox 2.0 and up, Google Chrome 18.0 and up, Apple Safari 3.0 and up
Figure 13: Android Wi-Fi menu
Figure 14: Password protection for direct connect mode
7
Directly Connecting An Android Device
Solitude Wireless Wi-Fi Controller Module Installation Instructions
81188 Rev A 02/16
