DOC NO. 81078
Page 17 of 18
Rev D 3/06 GM
Maintaining your Steam Generator
Manual Powerflush
Warning: Exit shower area once the powerflush is started as hot water from Steamhead can burn you. Keep
the steam door on the enclosure closed during this cycle.
1. Power on the control and set the timer to 45 minutes.
2. Open the powerflush ball valve located on top of the generator for 5-7 minutes.
3. After 5-7 minutes close the powerflush ball valve.
4.
Allow generator to finish the 45-minute session.
** ThermaSol recommends one powerflush cycle after every fifty uses or at least
twice a year. **
Warning: IT IS IMPORTANT THAT NO ONE BE INSIDE THE SHOWER ENCLOSURE
DURING THE POWERFLUSH CLEANING CYCLE. IT IS ALSO IMPORTANT THAT THE
ENCLOSURE DOOR BE CLOSED DURING THIS CYCLE.
