Bigwater 780e
CL-W0169
English
English
13
14
2.4.2.1 Install the Clip on Motherboard
2.4.2
Install waterblock by clips included in package
A-Metal H-type clip
B-Cushion
C-Insulator
D-50mm screws
E-Thumb nuts
F-White washers
G-Thermal compound
I -Stand offs
Components for AMD AM2/AM2+ :
AMD AM2 Motherboard
Remove the retention
module from the motherboard.
Remove the back plate on
back side of motherboard.
Tear off the tape on the back of
the insulator (C) and place it on
the metal H-type clip(A).
Note: Placing the cushion onto
the motherboard with the
adhesive will prevent you from
removing the cushion in the
future. If you are planning to
remove the cushion for future
use, please don't remove the
protective tape.
A
B
C
D
E
F
I
G
2.4.2.2 Install Waterblock on Motherboard
Combine the insulator(C) and the
cushion (B) using the adhesive.
Stick the metal H-type clip(A) with the
insulators (BC). Tear off the protective
layer to adhere it onto the motherboard.
Attach H-type clips(including
ABC)on the back side of
motherboard.
Exploded View
Completed View
1.Insert the screws (D) through the clip(ABC)
into the four holes on the motherboard.
2.Put the washers (F) along the screws to prevent
the electric current.
3.Put the stand offs (I) along the screws to fix the
screws on the motherboard.
4.Apply a thin layer of thermal compound(G) onto
the processor.
5.Place waterblock on the processor through the
screws and fix it by thumb nuts(E).
A
C
B
E
A
I
F
D
G
A C
B
