Thermal Care Accuchiller KSE, Operation, Installation, And Maintenance Manual

Page: 25 / 40

19
User Setup – Temperature Retransmit
Figure 45 - User Setup – Temperature Retransmit
Setup Screen
User Setup – IP Address
Figure 46 - User Setup – IP Address Setup Screen
User Setup – Units
Figure 47 - User Setup – Display Units Setup Screen
User Setup – Remote Setpoint
When the remote setpoint option is active, an
incoming 4-20mA or 0-10VDC signal controls the
setpoint of the master chiller. The signal will span
from the MINIMUM TEMPERATURE to the
MAXIMUM TEMPERATURE as defined in the
following figure.
Figure 48 - User Setup – Remote Setpoint Setup
Screen
User Setup – Primary / Secondary
Figure 49 - User Setup – Primary / Secondary Setup
Screen