Thermal Arc POWERMASTER 320SP, Service Manual

Page: 9 / 40

page 9
Picture Pc-board DP-MAPRO
Overview connectors Pc-board DP-MAPRO
connector designation
X1 connector to power uint 1
X2 connector control transformer (supply of pc-board)
X3 connector to pc-baord DS-ERW (not used in Transmig machines)
X4 connector to power uint 2
X5 connector to Interpass hose package
X6 230V supply fans/cooling unit (from control transformer)
X7 connector fan group 1
X8 CAN connector
X9 connector fl ow meter
X10 connector gas valve (only used when TIG option is installed)
X11 connector front panel
X13 connector cooling unit
X14 CAN connector
X15 connector TIG torch button
X16 connector volt/amp display
X17 connector output voltage (to pc-board DP-UFI-BO)
X18 connector remote control
X19 connector gas test button
X20 CAN connector
X21 connector JTAG interface (internal programming port)
X22 connector JTAG interface (internal programming port)
X23 connector serial Interface (RS232: internal programming port)