Thermal Arc FABRICATOR 181i, Operating Manual

Page: 28 / 100

Fabricator 181i
INTRODUCTION 2-4 Manual 0-5191
2.09 Specifications
DESCRIPTION FABRICATOR 181i MULTI PROCESS 3 IN 1 WELDER
Power Source Part No. W1003180
Power Source Dimensions H16.14" x W8.27" x D17.72" (410mm x 210mm x 450mm)
Power Source Mass 32.2lb(14.6kg)
Cooling Fan Cooled
Welder Type Multi Process Welding System
Output Terminal Type Dinse
TM
50
Standards CSA E60974-1-00 / UL60974-1 / IEC 60974-1
Number of Phases Single Phase
Nominal Supply Voltage 230V AC
Supply Voltage Range 208-265V AC
Supply Frequency 50/60Hz
Welding Current Range (MIG Mode) 10-180A
Wirefeed Speed Range 100 - 650 IPM
MIG Welding Voltage Range 14.5 - 23V DC
Nominal OCV 62V DC
Effective Input Current (I
1eff
)
for MIG (GMAW/FCAW)
for LIFT TIG (GTAW)
for STICK (SMAW)
15.9 Amps
14.3 Amps
17.2 Amps
Maximum Input Current (I
1max
)
for MIG (GMAW/FCAW)
for LIFT TIG (GTAW)
for STICK (SMAW)
35.6 Amps
28.6 Amps
35.7 Amps
Single Phase Generator Requirement 9 KVA
MIG (GMAW/FCAW) Welding Output at 104°F
(40°C)
180A @ 20%, 23V
113A @ 60%, 19.7V
88A @ 100%, 18.4V
STICK (SMAW) Welding Output at 104°F
(40°C).
175A @ 20%, 27V
101A @ 60%, 24V
78A @ 100%, 23.1V
LIFT TIG (GTAW) Welding Output at 104°F
(40°C).
175A @ 25%, 17V
113A @ 60%, 14.5V
88A @ 100%, 13.5V
Protection Class IP23S
Table 2-1: Fabricator 181i Specification