17
The backguard must be attached before sliding the
range into the final installed position. A Low Back or
High Shelf backguard must be installed when there is
less than a 12" clearance between combustibles and
the back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 7).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance between
combustibles and the back of the range. (See Fig. 2B
on Page 7).
The backguard is inserted, as shown in Fig. 14, into
the guide channels on the back of the range. Secure
the backguard with the (4) sheet metal screws pro-
vided.
Step 7: Backguard Installation
Chart C: BACKGUARD KIT MODEL NUMBERS
RANGE MODEL NO.
9" STD. LOW BACK
12" LOW BACK
22" HIGH SHELF
3
-3
/
4
" ISLAND TRIM
PD304
Included with Range
N/A
HS30R
IT30R
PD36
N/A
LB36R
HS36R
IT36R
PD48
N/A
LB48R
HS48R
IT48R
FIG. 14
³
³
Backguard
Installed
Front of Unit
