CM Oven Service Manual
Lit. No. 94-30-006B
Page 93
REMOVING the OVEN LIGHT SWITCH, the OVEN DOOR LATCH
ASSEMBLY and the HI-TEMP CUTOUT in LOWER OVEN
Refer to illustration on Page 94 for the follow-
ing steps.
1.
Turn off the electrical power to the oven.
2.
Open the oven door for the component
you wish to remove.
3.
To remove the lower air vent grille
, re-
move the two front oven door latch
screws, (see illustration, below), then pull
the posts on the ends of the air vent grille
out of the catches in the chassis.
4.
To remove the oven light switch
, discon-
nect the wires from the terminals, press
in on the locking arms, and push the
switch out of the vent (see Inset 1, Page
94).
5.
To remove the oven door latch assembly
(see Inset 2, Page 94)
:
a) Use a 1/4" ratchet and a 1/4" thin-wall
socket and remove the two front hex-
head screws from the latch bracket.
b) Pull the latch assembly to the right so
that the flange on the left side clears
the bracket, and then pull it forward
as far as the wires will allow.
c) Remove the wires from the switch con-
nectors and the motor wires from the
main harness.
d) To replace a door lock or door unlock
switch on the latch assembly
, remove
the two screws from the switch body,
and remove the switch.
6.
To remove the hi-temp cutout (see Inset
3, Page 94)
:
a) Remove the two 1/4" hex-head screws
from the bracket.
b) Remove the hi-temp cutout and discon-
nect the wires.
7.
Install the replacement component.
8.
Reassemble the oven.
WARNING
Turn off the electrical power circuit to the
oven at the main junction box before ser-
vicing this unit.
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
CAUTION
OVEN DOOR
LATCH SCREWS
LOWER AIR VENT GRILLE
PULL TOP OF VENT GRILLE FORWARD
TO REMOVE POST FROM CATCH
CATCH
PULL TOP OF VENT GRILLE FORWARD
TO REMOVE POST FROM CATCH
POST
OVEN CHASSIS
