THERAFIN CORPORATION
Phone 800-843-7234 Fax 888-479-1515
REPLACEMENT PARTS FOR THE SQUEEZE MACHINE
page 8
Pulley Rope Assembly part # 18068
To get to the rope assembly you have to remove
the wooden box that covers part of it (left picture).
4 screws have to be removed (right picture):
2 on top, and 2 below the front control panel
(metal box).
Pictures below, (left to right) show:
Pulley rope assembly with wooden box removed.
Slide ball up rope, unbolt eye hook from wood.
Bend cotter pin straight, and remove. Rotate black
end of shaft so silver pin that rope goes around can
be removed. Rope will then fall free.
Pulley Rope
Assembly
Cotter Pin &
Silver Pin In
End Of Shaft
Unbolt
Remove
Remove
Cover
Bungee Cord part # 05304
Stretch bungee cord enough to untie the
knot at the end.
Hold it tight so it doesn’t contract and fly
through the holes.
Using two hands, guide it through the
holes until all the tension is off the bungee
cord.
Untie
Knot
Cord
