THERAFIN CORPORATION
Phone 800-843-7234 Fax 888-479-1515
Loosen the knobs and adjust the side pad as needed. Before tightening knob, make sure the bolt is in one of
the notches that is cut in the board. The picture on the right shows the full range of adjustability.
Headrest Assembly
Loosen the knobs while supporting the front of the headrest assembly, as shown in the middle picture. Adjust
the height of the assembly as needed. Before tightening knob, make sure the bolt is in one of the notches that
is cut in the board, then tighten. To adjust the headrest strap, remove the knobs from the underside of the
assembly, as shown in the picture on the right. Slide the bolt through the appropriate adjustment hole and
replace knob.
Hand Control Box
Loosen the knobs and adjust the position of the hand control box as needed. The round red ball should be at
a comfortable reach. Tighten knobs.
ADJUSTING (continued)
page 4
Side Pads
Side Pad
Notches
Knobs
Knob
Notches
Headrest Assembly
Adjustment
Holes
Knob
Hand Control Box
Knob
Note: Adjust pads wider for greater
comfort and to apply even pressure on
all parts of the body. Example: For
children the pads can be straight. For
men the pads may be set wider in the
shoulder area. For women the pads
may be set wider in the hip area.
