THERAFIN CORPORATION
Phone 800-843-7234 Fax 888-479-1515
DISASSEMBLY (continued)
page 12
Side Pad Assembly (continued)
Stretch bungee cord enough to untie the
knot at the end.
Hold it tight so it doesn’t contract and fly
through the holes.
Using two hands, guide it through the
holes until all the tension is off the bungee
cord.
Remove knobs and remove entire side pad
assembly.
Suggestion: After removing side pad
assembly, put the knobs and other hard-
ware back on the bolts so you don’t lose
them.
Follow the same process to remove the
other side pad assembly.
Lay something protective (cardboard, rug,
etc.) down on floor, and carefully lay the
unit onto it, on it’s side.
Stabilizer Arm
Remove 2 screws from underneath base.
Remove 4 screws from side of stabilizer
arm.
Carefully remove stabilizer arm.
Side Pad
Removed
No Side Pads,
Lay On Side
Remove
Remove
Remove Arm
Untie
Knot
Cord
