INSTALLING YOUR
MAGFLO PUMP:
Determine Installation Method
The MagFlo’s versatile nature allows you to configure
your pump set up in multiple ways. Select the method
below that best suits your application.
1. Attach flow control valve (C) to pump outlet of
MagFlo pump (A).
2. Attach extension tube (D) in any order to flow
control valve (C). Multiple tubes provided to
achieve desired fountain height.
3. Attach desired fountain spray pattern (G or H) to
extension tube (D).
4. Continue to Step 2.
1. Attach outlet male tubing adapter (E or F) to
pump outlet of MagFlo pump (A).
2. Connect and secure your pond tubing to tubing
adapter (E or F) with a hose clamp (not included).
3. Connect pond tubing to your waterfall
or water feature.
4. Continue to Step 2.
• MagFlo Pump should be placed on a flat
surface away from sludge or algae mats.
• DO NOT run the pump dry. To prevent
overheating, unplug pump if there is no
water running through it.
• Keep MagFlo Pump pre-filter free of
debris.
• DO NOT operate during freezing
conditions. Drain the MagFlo Pump and
store in a protected area.
thepondguy.com | 866-POND-HELP (766-3435)
4
