Wash Pre-Filter Sponge & Impeller Screen
Remove pump pre-filter sponge and impeller screen.
Wash thoroughly with water.
MAINTAINING YOUR
MAGFLO PUMP CONT:
Remove Impeller Cover & Impeller
Remove the impeller cover by turning counter-clockwise
and then pulling to separate. Grasp by white impeller and
lift out of chamber.
(Warning: Pump is magnetically driven. You may experience a magnetic
pull when removing and re-installing impeller.)
Clean Impeller & Fountain
Clean impeller and impeller chamber with water. Remove
and disassemble fountain connections and tubing
adapters. Wash thoroughly with water. A small brush or
descaler may be helpful. If using a descaler, be sure to
rinse all parts with clean water before reassembly.
Reassemble Pump
Reassemble impeller, impeller cover, impeller screen,
pre-filter sponge, and pump pre-filter.
(Note: Lower the impeller carefully into the chamber, allowing the
impeller to gently drop into the chamber. Too much force can damage
the pump.)
thepondguy.com | 866-POND-HELP (766-3435)
7
