14
(Fig.7)
(Fig.8)
(Fig.9)
Disassembly outside cover
1) When power off and disassemble the top cover,remove the decoration panel-3 by remove the
screws-2.Push up the decoration panel-3vertically by 150-200mm until it separate from the hang
buckle-4.(View Fig.7,Fig.8)
2) Loose the power wire from the terminal block,to avoid the wire get stuck when move up the top
shell.
3) Remove all the screws(item-2) from the Back panel(item-5),two sides decoration bar(item-6)and
tank shell(item-7).(View Fig.9)
4) At last,lift up the back panel(item-5)slightly can finish the disassembly.(View Fig.9)
5) After maintenance,make sure the air outlet of shell should be aimed at the fan outlet pearl cotton
when reinstall the shell.
