Themis RES - 32XR3, Installation Manual

Page: 98 / 142

3-32
Themis Computer
RES-21XR3 for X8SAX Installation Manual
being reprogrammed. The screen will also display a message as shown below.
DO NOT INTERRUPT THIS PROCESS!
5. When the Boot Sector Recovery Process is complete, the system will reboot
automatically and you will see a checksum error on your screen.
3.7.1.2 Part 2—BIOS Reprogramming (Re-Flashing)
After completing the Boot Sector Recovery Process, you will need to reprogram
(“re-flash”) the proper BIOS binary file again into the BIOS ROM in order to have
the correct BIOS file loaded by the system. For details on how to flash/re-flash a
BIOS, please check our website for “Update your BIOS”, or see the section 3-3
(FAQ) of this manual. DO NOT INTERRUPT THIS PROCESS!
When completed, the system will reboot automatically, and you will see a checksum
error again.
Press “F1” to go to setup. Press “F9” to load the defaults and then press “F10” to
save and exit.
3.7.2 Recovery from an IDE/SATA ATAPI Disc Drive
This process is almost identical to the process of Boot Sector Recovery from a USB
device, except that the BIOS image file (super.rom) is loaded from an IDE/ATAPI
CD/DVD/ROM/RW disc drive that is attached to the system. Note that loading from
an IDE/SATA hard disk drive is NOT supported.
1. Using a different system, download and copy the correct BIOS binary image
into a writable CD/DVD disc's Root “\” Directory. Rename the downloaded
Figure 3-6. Flash Recovery