A-3
Themis Computer
A—Disassembling and Reassembling Boards (Themis USPIIe Family of Computers)
Disassembling the Boards
Figure A-2.
Remove 3 Screws Securing Injector/Ejector Handles
Note:
The USPIIe-USB family of boards is available with standard VME ejector
handles or VME64 injector/ejector handles. The handles shown in
Figure A-1
(Step #1) are standard VME ejector handles, which pose no problem to screw-
removal. However, the shape of the VME64 injector/ejector-type handles prohibit
straight-on screwdriver access to the upper and lower faceplate screws. If the
faceplate screws on your board assembly are obstructed by the handles, then it
will be necessary to remove the handles first. Remove the three screws that secure
the lower injector/ejector handles (
Figure A-2
). The handles should easily slide
off the faceplate assembly.
Repeat for the upper injector/ejector handles.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com