A-1
Themis Computer
A
Disassembling and Reassembling Boards
(Themis USPIIe Family of Computers)
This appendix provides instructions for disassembling and reassembling Themis
Multi-Slot VME Computers for the purposes of accessing a PMC module or replac-
ing a particular board’s battery.
Before you can begin these procedures, you will need the following:
• a static-safe work area that conforms to industry-standard practices.
• a high quality precision Phillips screwdriver (for example - Wiha 261 series,
[
http://www.wihatools.com/261serie.htm
], or similar), tip size #1.
Note:
This procedure applies to Themis’s USPIIe Family of Computers only:
USPIIe, USPIIe-USB, and USPIIe-Gb.
The procedure will be similar for others boards; for example, the 2P2 PMC/XMC
Carrier Board.
Caution:
It it necessary to observe industry-standard ESD precautions at all times
when handling boards; work on a static-safe mat and wear a wrist-strap. Failure to
do so could cause damage to the board.
Caution:
Themis Computer is not responsible for any damage to boards or equipment
caused by customer repairs. Any such damage invalidates the customer warranty.
Appendix
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com