Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and powered
on, you can configure the 1U4600 so that it is accessible to your network users.
There are two ways to set up your 1U4600: using the Thecus Setup Wizard or the
LCD display. Follow the steps below for initial software setup.
Thecus Setup Wizard
The handy Thecus Setup Wizard makes configuring 1U4600 a snap. To configure the
1U4600 using the Setup Wizard, perform the following steps:
1.
Insert the installation CD into your CD-ROM drive (the host PC must be
connected to the network).
2.
The Setup Wizard should launch automatically. If not, please browse your
CD-ROM drive and double click on Setup.exe.
NOTE
For MAC OS X users, double click on Thecus Setup Wizard .dmg file.
3.
The Setup Wizard will start and automatically detect all Thecus storage
devices on your network. If none are found, please check your connection
and refer to
Chapter 7: Troubleshooting
for assistance.
4.
Select the 1U4600 that you like to configure.
5.
Login with the administrator account and password. The default account and
password are both “
admin
”.
17