2
Terminal layout
1 OT
2 OT
3 ext. input
4 ext. input
5. Manual setting at the clock thermostat
Button with LED display for setting
– Comfort mode (green LED on)
– ECO mode (green LED off)
By using the button, the following functions can be set:
1. Quick selection of comfort or eco mode
¾
Press the button
▻ Comfort mode or eco mode will be set.
At the next switching time, the quick selection will be reset.
2. Pairing
¾
Press the button for 3 s
▻
RAMSES BLE OT can be connected with a smartphone/
tablet (paired) for 5 min. (green LED flashes). If pairing
is successful, the LED goes out.
Delete pairing
¾
Press the button for 6 s
▻
All connections saved in the RAMSES BLE OT (pairing)
will be deleted (red LED flashes)
¾
Delete the connection/pairing also on the smartphone/
tablet (Settings
→
Bluetooth pairing
→
delete respective
device (RAMSES BLE OT)).
The PIN will be reset to 0.
3. Reset
¾
Press the button for 12 s
▻
Hardware reset (the red LED goes out)
6. Settings and functions – operation via
Theben app
Is my smartphone BLE capable?
¾
Download Bluescan app for Android and iOS
The app can be used to check whether a device is BLE capa-
ble or not.
RAMSES BLE app
Set temperature, adjustable in
increments of 0.2 °C (2 °C
– 30 °C)
Selection of Open-
Therm device
Settings, device management
Software info
Info: External input, flame, PIN etc.
Programming of
switching times
Operating modes:
– Programs P1 – P3
– Comfort, reduction, frost
Quick selection
Comfort mode*
Quick selection
Eco mode*
*until the next switching time
Connecting clock thermostat and smartphone (via
app) – pairing
The clock thermostats can be programmed using an app
(from Android 4.3, iOS 5) on a mobile end device. Communica
-
tion takes place via Bluetooth BLE.
¾
Download the RAMSES BLE app from the App Store or
Google Play Store
