RAM 712 KNX
room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 41 of 65
4 Start-up
4.1 Installation in a flush-mounted socket
The controller and circuit board are fixed with a release fastener and can simply released from the
white housing for installation in a flush-mounted socket.
IMPORTANT
:
The device must not be installed if the flush-mounted socket is connected to
mains!
Procedure:
•
Remove control from base of housing (release fastener) and install in a flush-mounted
socket.
•
Install the integrated temperature sensor to allow reliable measurement of room
temperature (If there is any doubt find the correct position by trial and error).
•
Ensure there is adequate ventilation.
•
If necessary, use external sensor