RAM 712 KNX
room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 28 of 65
Continuation
Designation
Values
Application
Comfort extension by
presence keys in night mode*
None
Telegrams from presence key
are not considered.
30 minutes.
1 hour
1.5 hours
2 hours
2.5 hours
3 hours
3.5 hours
Party switching:
This allows Ram 712 to
change via presence object
from
night/frost mode to comfort
mode again for a set length of
time.
The time limit is omitted if
the device was previously in
standby mode.
Comfort operation is only
cleared with the next manual
or bus controlled change of
operating mode.
Sends the current operating
mode cyclically
Not cyclical, only in the
event of change
Every 2 min., every 3 min.
Every 5 min., every 10 min.
Every 15 min., every 20 min.
Every 30 min., every 45 min.
Every 60 min.
How often should the current
operating mode be sent?
*Parameter is not available with presence detectors