Theben RAM 712 KNX, Manual

Page: 12 / 65

RAM 712 KNX
room thermostat for surface-mounted and flush-mounted installation
theben
Version: Dec-10 (subject to change) Page 12 of 65
•
Object 3 "Operating mode preset"/ "night <-> standby"
The function of this object depends on the
objects for setting operating mode on the operating
mode parameter page.
Table 4
Objects for determining the operating
mode Object function
Operating mode, presence, window
status 1 byte object. One of 4 operating modes can be
directly activated.
1 = comfort, 2 = standby, 3 = night,
4 = frost protection (heat protection)
If another value is received (0 or >4) the comfort
operating mode is activated.
The details in brackets refer to cooling mode
old.: Comfort, night, frost 1 bit object.
Night or standby operating mode can be activated.
0=standby 1=night
•
Object 4 "Presence" / "comfort"
The function of this object depends on the
objects for setting operating mode on the operating
mode parameter page.
Table 5
Objects for determining the operating
mode Object function
Operating mode, presence, window
status Presence:
The status of a presence indicator (e.g. sensor,
motion detector) can be received via this object.
1 on this object activates the comfort operating
mode.
old: Comfort, night, frost Comfort:
1 on this object activates the comfort operating
mode.
This operating mode takes priority over night and
standby modes.
Comfort mode is deactivated by sending a 0 to the
object.