Outside of
enclosure
05/2021 V 1.0
VIEW 23
Cover Plate
Clamping
Plate
x
12/17
Measure the distance between the
Inline Panels.
Mark and cut the Underframe Top.
Snap the Underframe Top on to the
Underframe.
Attach the Glass to Glass Hinges in the
direction your door will open and
tighten to the Inline Panel.
Evenly tighten the screws until the
Gaskets are just “nipping” the Glass.
Tighten all the screws to 15.6N.
Check the orientation of the Cover
Plates. Adjust Clamping Plate to Suit.
DO NOT fit the Cover Plates yet.
Attach the Glass to Glass seal to the
Inline Panel.
Ensure a good seal along the edge of
the door.
Check the orientation is correct.
Remove the seals after checking.
Inside Enclosure
Inward Opening
Outward Opening
Inside Enclosure
33
34
35
36
