05/2021 V 1.0
VIEW 23
6mm min
Wall Pro
fi
le
Glass Panel
04/17
Remove and replace the Panels adding
or subtracting spacers as necessary to
level the Panel (to a maximum height
of 5mm inside the Underframe).
Check the Panel is level using a Spirit
Level.
Align the Return Panels so there is a
4mm gap between the Panel and the
front face of the Front Underframe.
Ensure there is adequate glass in both
the Wall Profiles. (6mm is
recommended)
If the Wall Profiles are flush with the
Glass Panels, move on to step 19.
If the Wall Profiles are not flush with
the top of the Glass Panels, mark the
Wall Profile. Using a straight edge,
mark where the wall channel needs to
be trimmed.
To protect the channel finish, it is
recommended to mark on masking
tape.
13
14
15
16
4mm
