05/2021 V 1.0
VIEW 23
Flush
Rigid Seal
Glass Panel
05/17
Remove the Panels, Wall Profile Soft
Seals, and the Wall Profiles.
Trim the Wall Profiles.
Use a fine file to remove any burrs. Be
careful not to damage the channel
finish.
Re drill the screws in to the Wall
Profiles and remove after drilling.
Reinstall the Wall Profiles, Wall Profile
Soft Seals, and Glass Panels.
To centre the panels, add 1mm Packers
on both sides of the Return Panels in
the Underframe.
Apply the Rigid Seals to the dry side of
the Wall Profiles starting from the
archway of the Wall Profile up to the
top.
WARNING
The glass is heavy and may
damage the
fl
oor or underframe if
handled incorrectly. It is advisable
to use a suitable non-slip
protective mat or piece of carpet.
Never rest the glass across the
underframe as this may cause
damage.
17
18
19
20
