10/2021 V 1.1
VIEW 02
03/06
Li� the Door out and safely put to one
side.
If OUTWARD opening, use the supplied
Marking Template to locate Hole “B”.
Use masking tape on the wall to mark
the measurements.
Using a Ø6mm high quality drill bit for
a clean and precise hole, drill all holes
and fully insert the wall plugs.
Ensure the Door Supports are s�ll in
place.
Carefully li� the door back into posi�on
and securely a�ach the Hinges to the
wall.
Make sure the screws are flush with
the bracket face.
Snap the Underframe Top on to the
Underframe.
Professional Tip
If drilling ceramic tiles, place
masking tape on the tiles before
marking and drill through the
tape to prevent the drill bit from
skidding.
DO NOT use Hammer Action as
this will break the tiles.
Outside of
enclosure
Flush
09
10
11
12
