O
utside enclosur
e
O
utside enclosur
e
OUTWARD Opening
INWARD Opening
10/2021 V 1.1
VIEW 02
02/06
Loosely assemble the two 90° Glass to
Wall Hinges onto the door. Take note of
which way your Hinges move.
The face that a�aches to the wall
should be located inside the enclosure.
Check the orienta�on of the Cover
Plates. Adjust Clamping Plate to Suit.
Evenly �ghten the screws un�l the
Gaskets are just "nipping" the glass.
Place the Door Supports evenly over
the Frame.
Check the orienta�on against your door
direc�on.
With one person inside the enclosure,
posi�on the Door onto the Door
Supports as indicated.
First, check there is a gap of 9mm
between the edge of glass and �le.
Ensure the Door is ver�cal and level.
Mark the accessible holes where the
Hinges will be a�ached to the wall.
It is recommended to use masking tape
on the �les to mark.
Hole “B”
See step 09
9
05
06
07
08
