10/2021 V 1.1
VIEW 02
Trim the flaps
Notch
Tray
Trim the flaps
Notch
Tray
04/06
Measure the width of the Door and
trim the Bo�om Door Seal accordingly
with a fine toothed junior hacksaw.
A�ach the Seal ensuring the Seal is
correctly oriented.
Check the Glass to Wall “Bubble” Seal
orienta�on and trim a notch to fit
around the Bo�om Door Seal.
Check the Glass to Wall Seal orienta�on
and trim a notch to fit around the
Bo�om Door Seal.
Push both Ver�cal Seals down as far as
they can go.
With a straight edge, mark where the
Seals will be trimmed. Remove the
Seals and trim with a fine toothed
junior hacksaw so they are flush with
the tops of the Glass Panels.
Replace the seals.
Outside of
enclosure
13
14
15
16
