For the blade cutting attachment
1. Match the hole in the side of the cutting attachment guard with the hole in the side of the gear housing.
2. Then insert a 4mm Allen wrench into the holes to stop the clamp moving. Fig.11
3. Undo the shaft nut on the blade cutting attachment head by turning in a clockwise direction with the spanner provided.
4. Remove the blade cutting attachment tightening nut, cup washer and lower blade mounting washer from the gear housing.
5. Fit the cutting blade as in Fig. 12 and tighten the nut securely in an anti-clockwise direction.
6. Remove the 4mm Allen wrench.
7. When not in use store the blade in its protective cover as in Fig. 13.
Fig. 11
Fig. 12
Fig. 13
8. EXAMPLE OF FUEL - MIXING
8-1 Fuel mixing
Use unleaded petrol containing 4%, 2 stroke mineral engine oil (or a ratio of 25:1)
or
for 2 stroke semi-synthetic or synthetic engine oils
follow the oil manufacturer’s instructions.
WARNING
1.
Use a container to mix petrol with 2 stroke engine oil. Do not mix them in the fuel tank directly. Wipe off spilt fuel immediately.
2.
Do not use mixed fuel that is older than 30 days as it will deteriorate over time and adversely affect the engine.
3.
Do not smoke while mixing fuels.
8
Summary of Contents for THPK27L
Page 27: ...26 ...
