ASSEMBLY
LIFTING HANDLE
Mount the lifting handle to the U bracket with two
M6×16 bolts.
LOG TRAY
1.
Mount the guard bottom plate to the rear
guiding plate and secure with two M6×12
socket head cap screws and locknuts. Loosen
the socket head cap screw and big washer on
the wheel bracket, insert the open end of
support strut B between the big washer and
wheel bracket and tighten screw.
Connect the upper end of support strut B to
the guard bottom plate with cross recessed
pan head screw M6×12 and locknut M6 and
then tighten it.