SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
Model Number
THLS-6G
Product Number
1938181001
Motor*
(220-240V ~50Hz 9.6A), 2200W, S3 25%,
9.6A
Splitting Force
6 Ton
Forward Speed
3.08cm/s
Retract Speed
5.29cm/s
Hydraulic Pressure
20.8 Mpa
Hydraulic Oil Tank Capacity
3.5L
Hydraulic Oil
Type 22
Stroke Length (mm)
370
Log Capacity Diameter (mm)**
Min 50
–
250 Max
Log Capacity Length (mm)
Min 200
–
520 Max
Overall Size (cm)
L 116, W 42.5, H 61
Weight (kg)
N.W 59
–
G.W 63
Noise Pressure Level (LpA)
78.8 dbA under no load;
89.8 dbA under full load
Vibration
< 2.5 m/s²
* S3 25%, Intermittent periodic duty: time of one load cycle is 10 minutes, operation time at constant load is
2.5 minutes, de-energized and at rest is 7.5 minutes.
** The diameter of the log is not the only factor that determines how easy it will be to split. A small log can
be difficult to split when it has knots or is a particularly hard wood.
IMPORTANT INFORMATION
HYDRAULIC OIL
This machine is supplied with hydraulic oil from the factory, to allow the machine to be used straight from the carton
following assembly. Do check the oil level (instructions available in the manual) prior to the first use and periodically
thereafter. Type 22 hydraulic oil is recommended.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 220-240V±10% (50Hz±1Hz) electrical supply which has protection devices of
under-voltage, over-voltage, over-current as well as a residual current device (RCD) which
maximum residual current rated at 0.03A.
EXTENSIONS LEADS
Improper use of extension cords may cause inefficient operation of the logsplitter which can result in overheating. Be
sure the extension cord is no longer than 10m and its section is no less than 2.5mm² to allow sufficient current flow to
the motor. Avoid use of free and inadequately insulated connections. Connections must be made with protected
material suitable for outdoor use.
WORKING CONDITIONS
This log splitter is for domestic use only (commercial usage will reduce the warranty period of the machine
–
see
warranty pages for details). It is designed for operating under ambient temperatures b5°C and 40°C and for
installation at altitudes no more than 1000m above M.S.L. The surrounding humidity should be less than 50% at 40°C.
It can be stored or transported under ambient temperatures between -25°C and 55°C.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut square.
Branches must be cut off entirely so that the trunk is relatively smooth.
