2.
Align the two mounting holes of the log tray A
to the holes on rear side of the splitter. Insert
one socket head cap screw M6×12 and spring
washer 6 into the mounting hole on left side
and the other socket head cap screw M16×12
and locknut M6 on right side and securely
tighten both.
Loosen the cup head bolt and nut on left side of
the front leg, insert the open end of support
strut A onto the bolt and then tighten the nut.
Connect the upper end of support strut A to log
tray A with cross recessed pan head screw
M6×12 and locknut M6 and then tighten it.
3.
Align the two mounting holes of the log tray B
to the holes on front side of the splitter. Insert
one socket head cap screw M6×12 and spring
washer 6 into the mounting hole on right side
and the other socket head cap screw M6×12
and locknut M6 on left side and securely tighten
both.
Loosen the cup head bolt and nut on right side
of the front leg, insert the open end of support
strut A onto the bolt and then tighten the nut
.
Connect the upper end of support strut A to the
log tray B with cross recessed pan head screw
M6×12 and locknut M6 and then tighten it.