26
Get ready for
thefirstyears.com
™
Home & Away Portable
™
Digital Video Monitor
Pairing of Parent and Child Units
The Parent Unit and Child Unit are digitally paired at the factory. This means they
are digitally encrypted with the same electronic code so that they can securely
communicate with each other and not be confused by the signals sent out by
other electronic devices, such as cell phones or other monitors.
It is unlikely, but possible, that strong electronic interference, such as a power
surge, could erase this pairing. Should this occur, you can reset the pairing as
described below.
1. Press the Menu button.
2. Use the up
or down buttons on the directional pad to scroll through the
list of preferences until “Add/Remove Camera” is highlighted.
3. Press the OK button.
4. Use the sides of the directional pad to highlight ADD
5. Press the OK button
6. Follow the screen prompts to complete this operation. Please note that you
will be adding camera “1”.
Note:
The above assumes that you only have one Child Unit. If you have multiple
cameras connected to your video monitor system, you can use this same method
to re-connect cameras that have become unlinked.
Need Further Assistance?
If you follow these instructions, and your Monitor still does not function
properly, please contact our Customer Care at 800-704-8697.
