manualshive.com logo in svg

The First Years Home & Away, User Manual

Share
Download
The First Years Home & Away User Manual Download Page 11

Get ready for 

thefirstyears.com

™

              

11

English

To Set Up – Parent Unit

To install and charge battery pack

1.  Loosen the screw to release the 

battery compartment cover, then 
slide the cover off. 

2.  Insert the plug on the battery pack 

into the connector inside the battery 
compartment.

3.  Fit the battery pack into the 

compartment.

4.  Place the cover back onto the battery compartment and secure it by tightening  

 the screw.

5. 

Charge the battery

: Insert the connector on the AC adapter into the  

power jack on the side of the unit, and plug into an electrical outlet.

 The 

battery needs to be charged for 8 hours before the first portable use. 

IMPORTANT:

IF THE PARENT UNIT IS ON, THE POWER INDICATOR WILL GLOW PURPLE 
WHILE THE BATTERY IS CHARGING. ONCE THE BATTERY IS FULLY 
CHARGED, IT WILL GLOW BLUE. 

For plug-in use/recharging

Reconnect the Parent Unit to the AC adapter as for initial battery charging, and 
plug the adapter into an electrical outlet. If desired, open the stand to support 
unit in upright position for viewing and operating.

•   You may use the Monitor while charging; however, it will take longer to charge 

when in use. 

•   For best results, recharge daily. Keep plugged in overnight or for several hours 

a day.

IMPORTANT:

•  USE ONLY THE AC ADAPTERS SUPPLIED WITH THIS PRODUCT; USE OF 

ANY OTHER ADAPTER(S) COULD DAMAGE MONITOR AND WOULD VOID 
WARRANTY.

•  AC ADAPTERS SHOULD BE REGULARLY EXAMINED FOR SIGNS OF 

DAMAGE TO THE CORD, PLUG, ENCLOSURE OR OTHER PARTS; IN THE 
EVENT OF SUCH DAMAGE, IT MUST NOT BE USED .

•  TO OBTAIN REPLACEMENT AC ADAPTER: PLEASE CALL OUR CUSTOMER 

CARE AT 800-704-8697.

WARNING:

• Batteries may explode or leak if not used correctly. Follow all 

instructions for proper installation, use and storage.

Hold belt clip open to install battery pack

Summary of Contents for Home & Away








































Reviews:

No comments

Brands by name

Popular brands

Load more brands