manualshive.com logo in svg

Thames & Kosmos Code Gamer, Experiment Manual

Share
Download
Thames & Kosmos Code Gamer Experiment Manual Download Page 10

▲

Download page on www.arduino.cc

Preparation

To program your KosmoDuino, you will need an ordinary PC 
or laptop with the Arduino software installed on it. The 
software is also called a programming environment, since it 
includes a lot of tools that you will need for programming. 

INSTALLATION OF THE ARDUINO 
SOFTWARE

Download the Arduino software from 

https://www.

arduino.cc/en/main/software. On that page, you will find 
various versions for the current operating systems. For 
Windows operating systems, select “Windows Installer.”

After downloading, execute the downloaded file. Since the 
Arduino software is constantly being revised, there are 
always new versions. At the time that this manual was 
printed, 1.6.6 was the current version, and the file was 
called arduino-1.6.6-windows.exe. However, 

we 

recommend working with version 1.6.5, since this is the 
version that was extensively tested by us. You will find 
older versions on the “PREVIOUS RELEASES” page. After 
starting the installer, follow the instructions to complete 
the installation.

INSTALLATION OF THE KOSMOBITS 
LIBRARIES AND SAMPLES

In a 

software library, you will find lots of useful and 

reusable functions that will make programming easier for. 
The ones we developed are called the 

KosmoBits libraries. 

They also contain a lot of sample programs that you will 
find in this manual. 

You must install these libraries.

The KosmoBits libraries can be downloaded by entering  
http://thamesandkosmos.com/codegamer/kosmobits_
archive.zip

 

link into your web browser. The file is called 

kosmobits_archive.zip. This is a zip file that you will have 
to unzip and move into the Arduino libraries folder.

On the next page, you will be asked for a contribution. The 
Arduino project, which promotes the development of the 
Arduino software, is largely financed by these kinds of 
donations. You can also download the software for free 
without making a donation by clicking on “Just 
Download.”

Windows:
1. Open the explorer.
2. Go to the downloads folder.
3. Double-click the kosmobits_archive.zip file to open 

it.

4. Select all the files and folders in the libraries folder 

by simultaneously pressing the “Ctrl” and “A” keys.

5. Then press “Ctrl” and “C” to copy the selected files.
6. Go to the Documents 

➜

 Arduino 

➜

 libraries 

folder.

7. Now simultaneously press the “Ctrl” and “V” keys to 

paste the files and folders into the libraries folder.

Mac:
1. Unzip the kosmobits_archive.zip file.
2. Drag the contents of the libraries folder into the 

Documents 

➜

 Arduino 

➜

 libraries 

folder.

On either platform, you can alternatively try installing 

the libraries through the Arduino application itself:

1. In the Arduino application, go to the Sketch menu and 

choose Include Library 

➜

 Add .ZIP Library...

2. Navigate to the kosmobits_archive.zip file and click 

Choose/Open.

THE KOSMOBITS CONTROLLER

With your 

KosmoBits controller, you are holding your very 

own microcontroller in your hands. We named it 
KosmoDuino because it is based on the Arduino 
microcontroller. (KosmoBits is the name of the electronic 
system in this kit.) You can do a lot with the KosmoDuino, 
but first you have to learn how to 

program it. This manual 

will explain how.

Okay! Now you can begin programming. You will just need 
to open the Arduino application to get started.

8

Important! You must download and install the Arduino application from: 

https://www.arduino.cc/en/main/software
and you must download and install the Kosmobits libraries and programs from: 

http://thamesandkosmos.com/codegamer/kosmobits_archive.zip

CodeGamer manual inside english.indd   8

7/19/16   12:31 PM

Summary of Contents for Code Gamer



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands